• +33 (0)2 79 02 75 18


I am a beginner

Are you just starting to make lures?

First of all, you have to know that it is within everyone's reach, no need to be an expert in DIY to make your lures: who has not made "mako-moulding" in his primary classes?

There are several steps for the base, then the possibility of sophistication according to the desired result.

To make a soft lure you need to :                                                                                                      

  • Make your mold in RTV one shell                                                                  
  • Make your mold in double hull rtv                                                                      
  • Heat plastileurre, add colorants and flakes       
  • Pour into the mold                                                                                                                   
  • Allow to cool and then remove from the mould                                 

To manufacture a leaded head, it is necessary to :

  • Either buy a cast aluminium mould                                                                                 
  • Either make your own bricopâte mould ( heads of +15 g)                                                                   
  • Either make your mould in red single shell rtv                                                                                        
  • Either make your mold in red double hull rtv                                                   
  • Place the hook, close the mold and pour the lead                                                 
  • Decorate the leaded head with felt, paint, hologram, eyes...                                                                                                                                            


Glue the head to the body with the cyano bricoleurre glue.                                                                                                            

To make a hard resin lure, you must:

  • Make your mold in red double shell silicone                                                        
  • Manufacture the stainless steel frame                                                                                                                    
  • Mix the bricoresin with the fillers                                                                                     
  • Pour into the mold                                                                                                                                
  • Unmould, deburr and sand                                                                                                       
  • Decorate (bricologram, paint, markers)                                                                          
  • Varnish                                                                                                                                                                                                                                                                                                            

       To make a hard lead lure (jig, casting jigs):

  • Making your own bricopâte mould                                                                                                  
  • Make your mold in red double shell silicone                                                       
  • Manufacture the stainless steel frame                                                                                                                    
  • Casting lead                                                                                                                                          
  • Unmould, dazzle, sand                                                                                                               
  • Decorate (bricologram, felts, lead paint)                                                               
  • Varnish