By Jonathan Soudry on Friday 28 June 2019, 16:59 - Permalink
HOLOGRAPHIC FILM TRANSFER
1 - GLUING THE SUPPORT
It is preferable to work on a clean surface. Our films can be used on lead, resin, wood and plastics.
Apply the special glue with the brush cap of the bottle. The holographic film will only attach to the glued surfaces. Let the glue dry for at least 15 minutes.
Do not take the holographic film tape out of its container as it would be difficult to put it back in. Grasp the central spiral with tweezers and pull out only the required length.
2 - APPLICATION OF THE HOLOGRAPHIC FILM
Cut the required length of tape with a scissors. Apply it to the glued surface.
Apply strong finger pressure to the glued surface. Insist on the periphery. Gently pull the tape to remove the excess film.
An example of transfer to a hard lure.
The result of transfers to sealed heads.