10 photo tutorials
40 video tutorials
Find all the guides to make your own fishing lures.
Bricoresin is a two-component resin for the manufacture of hard lures. It is an opaque resin that sets in a few minutes.
To reinforce the structure of the resin, and to avoid any shrinkage during setting, it is recommended to add heavy or light load.
The heavy load will make the resin flow.
The light load will make the lure float.
A mixture of the 2 loads will make it suspending while reinforcing the structure, and lowering the cost of material.
LABELLING OF THE 2 PRODUCTS
Composition: diphenylmethane diisocyanate, isomers and homologues
Nature of risks: R20 harmful by inhalation - R36/37/38 irritating to eyes, respiratory tract and skin - R42/43 may cause sensitisation by inhalation and skin contact.
Safety phrases: S23 do not breathe gases, fumes, vapours, aerosols - S24 avoid contact with skin - S37 wear suitable gloves - S45 in case of accident or illness, consult your doctor - S60 dispose of the product and its container as hazardous waste.
BRICORESINE B :
Composition: isoparaffinic hydrocarbon, alkoxylated amine
Nature of risks: R36 eye irritant - R65 can cause lung damage if swallowed.
Safety phrases: S26 in case of contact with eyes, wash immediately with plenty of water and seek medical advice - S36 wear suitable protective clothing - S60 dispose of the product and its container as hazardous waste - S62 in case of ingestion, do not induce vomiting: seek medical advice immediately and show this label.