https://www.bricoleurre.uk/product/plastileurre-soft <p>Plastic to be poured into the moulds. Flexible version for worms and slugs.</p> https://www.bricoleurre.uk/product/plastileurre-injector <p>New product Bricoleurre 2016&nbsp;</p> <p>this new product has been developed by us.</p> <p>Injection allows lures to flow so the fineness does not allow gravity casting only.</p> <p>Very heavy ( about 800 g!) in order to keep the temperature of the plastileurre&nbsp;during injection, this injector has a head thread, for safety reasons, and does not have an untimely exit from the head as happens with unsecured injectors. It can be dangerous with a hot plastileurre&nbsp;at 160 &deg;!</p> https://www.bricoleurre.uk/product/bricoresine-hard-lures-2-kg-2x1-kg <p>Bricoresin is a two-component resin for the manufacture of hard lures. It is an opaque resin that sets in a few minutes.<br /> To reinforce the structure of the resin, and to avoid any shrinkage during setting, it is recommended to add heavy or light load.<br /> The heavy load will make the resin flow.<br /> The light load will make the lure float.<br /> A mixture of the 2 loads will make it suspending while reinforcing the structure, and lowering the cost of material.</p> https://www.bricoleurre.uk/product/jig-hooks-60-short-shaft <p>By 50.</p> <p>Strong iron hook, made for handymen with a double black nickel coating, for better protection against corrosion.</p> <p>The largest sizes (7.8 and 10/0) have been successfully tested on caragues and catfish!</p> <p>Note: a 60&deg; hook can be slightly corrected at 70&deg; or 80&deg; to fit a mold, but never in the other direction (40&deg; or 50&deg;... it breaks!)</p> https://www.bricoleurre.uk/product/round-large-popper-150-g <p>Turned, balanced, sanded wooden lure with 250/100th stainless steel frame. Exclusive Bricoleurre!</p> <p>These lures are decorated and varnished by hand by us.<br /> Length: 170 mm - Weight: 150 g<br /> &nbsp;4 colours available: rifle, pink head black, pink, malboro.</p> <p>if you want another color, buy the model to decorate, and make your own creation!</p> https://www.bricoleurre.uk/product/03-crazy-shad-10-cm <p>The Crazy Shad 10 cm was created with Bricoleurre products by Max, it is intended for all types of fishing for freshwater and marine predators, it is currently available in three sizes and 6 colors. He is in charge of squid attractant.</p> https://www.bricoleurre.uk/product/03-crazy-shad-125cm <p>The Crazy Shad 12.5 cm was created with Bricoleurre products by Max, it is intended for all types of fishing for freshwater and marine predators, it is currently available in three sizes and 6 colors.</p> https://www.bricoleurre.uk/product/3mm-white-eyes <p>Per 126.</p> https://www.bricoleurre.uk/product/49-strands-175-lb-O-091 <p>10 m.</p> https://www.bricoleurre.uk/product/49-strands-175-lb-O-114 <p>10 m.</p> https://www.bricoleurre.uk/product/50-100-copper-wire-for-frames <p>10 m.</p> https://www.bricoleurre.uk/product/accroche-leurre https://www.bricoleurre.uk/product/agrafe-cross-lock-inox https://www.bricoleurre.uk/product/agrafe-pour-lest-grenade https://www.bricoleurre.uk/product/agrafe-pour-tete-a-visser https://www.bricoleurre.uk/product/agrafes-a-plomb-cheburraska https://www.bricoleurre.uk/product/agrafe-jb https://www.bricoleurre.uk/product/agrafes-snaplock https://www.bricoleurre.uk/product/aimant-fixe-hamecons https://www.bricoleurre.uk/product/air-pump <p>This air pump has a flow rate of 300l/h. It is intended for the fluidized bath.</p> https://www.bricoleurre.uk/product/airbrush-gun <p>This gun is delivered in 2 parts, which need to be assembled. The pointed part of the tank screws inside.</p> <p>Simply connect the other part of the tank to a source of compressed air</p> <p>Insert the felt pen, wide side, point upwards. Press until it clicks.</p> <p>Then pull the trigger.</p> https://www.bricoleurre.uk/product/aluminium-charge <p>High Temperature Aluminium Filler for Bricor&eacute;sine</p> <p>Used for the manufacture of soft lure molds, double shells and manual injection.</p> <p>Capacity 500g</p> https://www.bricoleurre.uk/product/animation-produits-bricoleurre https://www.bricoleurre.uk/product/aniseed-aroma <p>Bottle of 25 ml. Aroma compatible with the plastileurre. Do not put the aroma on during the heating!&nbsp;</p> <p>place your lures in a pastel bag, add a few drops of flavouring, close the bag and crush everything to distribute the flavour evenly.</p> <p>The aroma is compatible with the lure, and enters the lure from the outside.</p> <p>The advantage of aromatization in the mass is the longevity of the efficiency compared to a simple soaking.</p> https://www.bricoleurre.uk/product/anneaux-soudes-inox https://www.bricoleurre.uk/product/assist-hook-exo https://www.bricoleurre.uk/product/assist-hook-monte https://www.bricoleurre.uk/product/assist-hook-not-mounted <p>Bag of 10 units</p> <p>Assist hooks are very strong hooks designed to be mounted on jigs.</p> <p>The rules to be respected are as follows:</p> <p>1/ the distance between the point and the hook shaft must be greater than the width of the Jig</p> <p>for info 13/0 30 mm, 11/0 25 mm, 9/0 21mm, 7/0 19 mm</p> <p>2/ it must be mounted on a special assist hook braid, ideally kevlar, and mounted on a welded ring (avoid a broken ring that will cut the braid by friction). This welded ring will be connected to the rolling swivel by a broken ring (see pictures)</p> https://www.bricoleurre.uk/product/assorted-fluorescent-beads-8-mm <p>Per 50.</p> https://www.bricoleurre.uk/product/assortiment-jupes-a-spinner https://www.bricoleurre.uk/product/assortiment-yeux-3-d-blancs-4-a-10-mm https://www.bricoleurre.uk/product/axe-inox-pour-cuillere-tournante https://www.bricoleurre.uk/product/auzou-chad https://www.bricoleurre.uk/product/bass-t-shirt <p>White cotton t-shirt 190 g, size M, bass logo.</p> https://www.bricoleurre.uk/product/beaker-100-ml <p>Borosilicate glass-beaker for microwave cooking of plastileurres.</p> https://www.bricoleurre.uk/product/becher-a-anse https://www.bricoleurre.uk/product/bellyshad <p>The bellyshad is a new model that can be cast vertically, without an injector.</p> <p>in soft plastileurre for the 75 and standard plastileurre for the 100.</p> <p>Its plump belly gives it a very attractive roll when descending, and the wide tail sends vibration to the traction.</p> <p>the thin tail lets the tail pallet vibrate from the smallest animation in vertical fishing;</p> <p>pike-perch fishing in both sizes, and successfully tested in size 100 on the bar!</p> https://www.bricoleurre.uk/product/berries <p>Bag of 20 red or black berries of various sizes, obtained by direct molding of real hawthorn fruits.<br /> These lures, made of standard Plastileurre, are intended for fishing for chub and perch. Their diameter varies from 8 to 15 mm and their weight is about 1 g. Not equipped with hooks, they float.</p> https://www.bricoleurre.uk/product/billes-laiton-percees https://www.bricoleurre.uk/product/bon-de-transport https://www.bricoleurre.uk/product/bon-de-transport-1 https://www.bricoleurre.uk/product/bricovision-long-bill https://www.bricoleurre.uk/product/briclaw https://www.bricoleurre.uk/product/bricobalam-230 https://www.bricoleurre.uk/product/bricofast-sinking https://www.bricoleurre.uk/product/brico-slide https://www.bricoleurre.uk/product/brico-tango-130 https://www.bricoleurre.uk/product/bricocrank-85 https://www.bricoleurre.uk/product/bricoflash-140 https://www.bricoleurre.uk/product/bricofreeze https://www.bricoleurre.uk/product/bricofrost-125 https://www.bricoleurre.uk/product/bricojerk-a-billes https://www.bricoleurre.uk/product/bricolames https://www.bricoleurre.uk/product/bricoleurre-cap <p>Official Bricoleurre cap!&nbsp;</p> https://www.bricoleurre.uk/product/bricoleurre-visor <p>adjustable strap visor.</p> <p>More pleasant than a cap, because it is less hot</p> <p>Good wind resistance</p> https://www.bricoleurre.uk/product/bricologram-glue <p>pecial adhesive for holographic ribbon transfer.<br /> Allow to dry 15 minutes before applying the holographic tape.</p> https://www.bricoleurre.uk/product/bricologram-kit-glue-6-ribbons <p>Kit including:</p> <p><br /> - 1 jar of special glue for Bricologram<br /> - 1 silver fibre ribbon<br /> - 1 silver ribbon small scale<br /> - 1 large scale silver ribbon<br /> - 1 gold ribbon<br /> - 1 star rain ribbon and 1 tricolour ribbon</p> https://www.bricoleurre.uk/product/bricologram-pro-roller-300-m <p>300 m long holographic ribbon to be transferred to sealed heads or hard lures using Bricologram glue.</p> https://www.bricoleurre.uk/product/bricologram-roll-12m <p>Holographic ribbon of at least 1.20 m long and 2.5 cm wide to be transferred to leaded heads or hard lures using Bricologram glue.</p> https://www.bricoleurre.uk/product/bricomousse-additive <p>The Bricomousse additive reduces the density of the foam. The bricomousse obtained by mixing 50/50 by weight of A and B is 240g/L. By adding 5% additive, the density increases to 50g /L. All intermediate densities can be obtained by appropriate dosage.</p> https://www.bricoleurre.uk/product/bricomure <p>Bag of 10 black or red handicrafts of various sizes, obtained by direct moulding of real blackberries.<br /> These lures, made of standard Plastileurre, are designed for chub fishing. Their diameter varies from 15 to 20 mm and their weight is about 2 g. Not equipped with hooks, they float.</p> <p><br /> FISHING SESSION FOR CHUBS</p> https://www.bricoleurre.uk/product/bricomures-mould <p>the bricom&ucirc;re mold is a silicone mold, allowing you to pour blackberries or raspberries for chub fishing</p> <p>The mold is ready to use. Simply pour black or red plastileurre to obtain blackberries or raspberries.</p> https://www.bricoleurre.uk/product/briconitro https://www.bricoleurre.uk/product/bricopate-1-kg <p>This silicone in mixing paste is intended for the manufacture of lead moulds. It is an alternative to RTV.</p> <p><strong>USE:</strong> <a href="/post/fabriquer-une-tp-double-coque-avec-de-la-bricopate">See the description of the implementation of the Bricopaste</a></p> <p><strong>THE MOST:</strong></p> <p>Setting speed: hard after 10 minutes. A double shell mould is possible and ready to be poured in less than 30 minutes!<br /> Ease: can be worked with a cutter easily<br /> Economy: 40% cheaper than RTV lead<br /> Practicality: use of the necessary quantity only because it can be easily handled before catalysis (non-adhesive paste)<br /> Strength: resistant to several hundred pours, talc-free<br /> Rigidity: keeps the shapes well with pressure during lead casting</p> <p><strong>THE LESS:</strong></p> <p>Less molding accuracy than RTV for details<br /> Requires good organization because the speed of setting is such that it is necessary to go quite fast after mixing with the catalyst for the impression taking</p> <p><strong>EMPLOYMENT ADVICE:</strong></p> <p>- Wear suitable gloves<br /> - Avoid contact with eyes. In case of contact with eyes, rinse thoroughly with clean water. In case of irritation, consult a doctor.<br /> - Do not leave within reach of children.<br /> - Do not ingest.</p> https://www.bricoleurre.uk/product/bricopate-1-kg-sans-catalyseur https://www.bricoleurre.uk/product/bricopop-120 https://www.bricoleurre.uk/product/bricopop-90 https://www.bricoleurre.uk/product/bricoresine-cristal https://www.bricoleurre.uk/product/bricoresine-hard-lures-6-kg-2x3-kg <p>BRICORESINE A:<br /> Composition: Diphenylmethane diisocyanate, isomers and homologues Nature of risks: R20 harmful by inhalation - R36/37/38 irritant for eyes, respiratory tract and skin - R42/43 may cause sensitisation by inhalation and skin contact.<br /> Safety phrases: S23 do not breathe gases, fumes, vapours, aerosols - S24 avoid contact with skin - S37 wear suitable gloves - S45 in case of accident or illness, consult your doctor - S60 dispose of the product and its container as hazardous waste.</p> <p>BRICORESINE B :<br /> Composition: isoparaffinic hydrocarbon, alkoxylated amine Nature of risks: R36 irritant for the eyes - R65 can cause lung damage if swallowed.<br /> Safety phrases: S26 in case of contact with eyes, wash immediately with plenty of water and seek medical advice - S36 wear suitable protective clothing - S60 dispose of the product and its container as hazardous waste - S62 in case of ingestion, do not induce vomiting: seek medical advice immediately and show this label.</p> https://www.bricoleurre.uk/product/bricosam-105 https://www.bricoleurre.uk/product/bricoshine-100-x-2 https://www.bricoleurre.uk/product/bricoslider https://www.bricoleurre.uk/product/bricospook https://www.bricoleurre.uk/product/bricotraine-175 https://www.bricoleurre.uk/product/bricotruite-45-1 https://www.bricoleurre.uk/product/bricotruite-55 https://www.bricoleurre.uk/product/bricotwitch-coulant-1 https://www.bricoleurre.uk/product/bricovernis <p>Highly transparent two-component epoxy varnish, non-yellowing to UV, shock-resistant but not brittle. Ideal for hard lures, wood, resin and plastic. Can also be used to re-link canes. To be dosed at 50/50. Preferably use a drying tower for an optimal finish. Large format for crawlers!</p> https://www.bricoleurre.uk/product/bricovernis-pro <p>Highly transparent two-component epoxy varnish, non-yellowing to UV, shock-resistant but not brittle. Ideal for hard lures, wood, resin and plastic. Can also be used to re-link canes. To be dosed at 50/50. Preferably use a drying tower for an optimal finish. Large format for crawlers!</p> https://www.bricoleurre.uk/product/bricovision https://www.bricoleurre.uk/product/bricowibe <p>THE BRICOWIBE Bricoleurre form a range of vibrations to decorate yourself</p> <p>different weights depending on the types of fishing and the targeted species.</p> <p><br /> Definition and presentation:</p> <p>Vibrating lure</p> <p>In the family of sinking lures, the vibration lure or vibrating blade is a LURE that can be formidable.</p> <p>It is a lure without a bib, often metallic or resin, the shape of which is mainly similar to that of a fish.</p> <p>The very strong vibration is generated by the flat top of the head, which acts like a bib.</p> <p>Animation of vibrators:<br /> Concerning the vibrators, we have two types of animations, either linear near the bottom for example, or vertically like a sawtooth.</p> <p>When to fish with a vibrating blade and which fish?<br /> When you have sufficient water depth, they can be very interesting. Almost all predators will be seduced by these vibrations, bass, perch, pike, zander and even beautiful chubs.</p> https://www.bricoleurre.uk/product/bricowibe-1 https://www.bricoleurre.uk/product/bricowobbler <p>THE BRICOWOBBLER</p> <p>Bag of 1 piece</p> <p>The Bricowobbler is a small sinking lure, which casts well given its density</p> <p>it sinks slowly with a &ldquo;wobble&rdquo; (lateral waddle) very attractive for the fish but sends a strong vibration with each pull</p> <p>weight 10 g length 95 mm for the sink</p> <p>weight 7 g, length 95 mm for hanging</p> <p>a fixed central ball for balance and ballast, and 2 movable balls for noise</p> <p>4mm eye</p> <p>triple armament n&deg; 6 or 4 and 6</p> https://www.bricoleurre.uk/product/bricowooper https://www.bricoleurre.uk/product/briquet-chalumeau https://www.bricoleurre.uk/product/broceel https://www.bricoleurre.uk/product/brosse-de-precision-pour-vernis https://www.bricoleurre.uk/product/brush-varnish-application <p>soft bristle brush for varnishing. Rinse with soap after use.</p> https://www.bricoleurre.uk/product/bumble-slug-140-1 https://www.bricoleurre.uk/product/bumble-slug-175 https://www.bricoleurre.uk/product/bumble-slug-220 https://www.bricoleurre.uk/product/buzzer-et-helices https://www.bricoleurre.uk/product/big-batter-mold <p>An RTV mold for casting a big paddle bait, which displaces a lot of water...</p> <p>to cast in standard plastilure despite its size, because the tail is worked to be very mobile even in slow linear.</p> <p>To be poured vertically then decorated with felt, or airbrushed</p> <p>Available in 2 sizes,</p> <p>- 200 mm (60 g unarmored)</p> <p>- 250 mm (90 g unarmored)</p> https://www.bricoleurre.uk/product/briques-lego-pour-cadres-a-moules-rtv https://www.bricoleurre.uk/product/cable-and-airbrush-gun <p>Made for&nbsp;AIRBRUSH Kit</p> https://www.bricoleurre.uk/product/catalyseur-pour-bricopate-1 https://www.bricoleurre.uk/product/catfish-x50 <p><strong>Per 50</strong></p> https://www.bricoleurre.uk/product/catfish-mushroom-mould <p>Bricoleurre exclusivity</p> <p>This mold developed by us allows an excellent reflection of the echo echo of the sounder, thanks to its flat face on top. Thus we can accurately locate the positioning of the bait in the water layer, follow the bottom, and place fish echoes within reach.</p> <p>the central rod leaves a space for the yarn to slide.</p> <p>the weight can be varied by casting the lead bottom and the upper part in bricoresin.</p> <p>weight in 100% lead 200 grs</p> https://www.bricoleurre.uk/product/cheburraska-mold <p>The cheburraska lead is made up of a round perforated lead and a clip in the shape of an angled paper clip which is inserted into this cavity to lock the assembly.</p> <p>Once assembled, after clipping a hook, the assembly allows for an articulated assembly.</p> <p>Formidable with a soft lure mounted on a Texan hook to pass through obstacles without snags.</p> <p>The handyman model is flattened on the sides to be able to stick a 3 D eye on it</p> <p>Editable at will.</p> <p>The DIY mold is made up of 2 half-molds and a rod intended to create the tunnel for the staple. DIY advice: remove the sinkers from the rod just after casting, to let them fall into the water. Once cooled, they are more difficult to remove.</p> <p>Really practical for quickly adapting to changing conditions, thanks to this ability to modify its ballast in a few seconds, the Cheburashka mount offers great freedom of action for the lure.</p> https://www.bricoleurre.uk/product/classic-broken-rings <p>Per 10</p> https://www.bricoleurre.uk/product/colorado-palette <p>per 10.</p> https://www.bricoleurre.uk/product/colorant-liquide-pour-artisans-500ml https://www.bricoleurre.uk/product/compresseur-pour-aerographe https://www.bricoleurre.uk/product/couverture-de-survie https://www.bricoleurre.uk/product/cups-stick-x-10 <p>graduated plastic cup with stick for a clean work. Material compatible with the varnish.</p> https://www.bricoleurre.uk/product/curling-pliers <p>Essential tool that allows you to make clean loops from 3 to 6 mm on steel wire.</p> https://www.bricoleurre.uk/product/cutter-jetable https://www.bricoleurre.uk/product/cyanoacrylate-glue <p>The glue of the competitors, technically one of the best on the market, and certainly the best quality/price ratio!</p> <p>A 20g bottle equipped with an anti-clogging needle.</p> <p>The advantages:<br /> - Sticks in seconds<br /> - Easy to use and easy to use<br /> - One-component (no preparation)<br /> - Dries at room temperature<br /> - Solvent-free<br /> - Glue a very wide variety of substrates<br /> - Very high tensile strength<br /> - Very high tear strength<br /> - Economical: a few drops are enough</p> <p>One-component &quot;insensitive surface&quot; cyanoacrylate adhesive based on hybrid ethyl with medium viscosity and fast drying. Formulated to glue a large number of substrates even under low or high humidity conditions.</p> <p>Store in a cool place and away from excessive exposure to light. Refrigeration of the glue at 5&deg;C increases the shelf life of the product by almost 4 times, freezing at -21&deg;C brings it to several years. In case the glue has been refrigerated or frozen it is essential to wait until it has returned to room temperature before using it.</p> https://www.bricoleurre.uk/product/catalyst-for-rtv-silicone <p>Bottle of 60 g.<br /> Suitable for red or white RTV silicone.<br /> Recommended dosage 5%, i. e. 5 g catalyst per 100 g RTV silicone.</p> <p>Employment advice:<br /> - Wear suitable gloves. Avoid contact with eyes. In case of contact with eyes, rinse thoroughly with clean water. In case of irritation, consult a doctor.<br /> - Do not leave within reach of children.<br /> - Do not ingest.</p> https://www.bricoleurre.uk/product/classic-colouring-powder <p>Bottle of 20 g.<br /> Powdered dye giving an opaque and pearly effect.</p> https://www.bricoleurre.uk/product/classic-liquid-dye <p>Bottle of 20 g.<br /> Mixture of liquid and powder dyestuffs giving a pearly effect.</p> https://www.bricoleurre.uk/product/colorant-poudre-fluo https://www.bricoleurre.uk/product/crayfish-mold <p>Double shell resin mold.</p> <p>Considering the details and appendages, it is advisable to inject it.</p> <p>To make pincers of a different color from the body, cast the pincers in the open mold, then close and inject the body and legs</p> https://www.bricoleurre.uk/product/crazy-shad-7-cm <p>The Crazy Shad 7 cm was created with Bricoleurre products by Max, it is intended for all types of fishing for freshwater and marine predators, it is currently available in three sizes and 6 colors. He is charged with squid attractant.</p> https://www.bricoleurre.uk/product/decoration-lure-140-g <p>Turned, balanced, sanded wooden lure, with 250/100th stainless steel frame, ready to be decorated. Bricoleurre exclusivity.<br /> Length: 240 mm - Weight: 140 g<br /> This lure is delivered in raw wood.</p> https://www.bricoleurre.uk/product/double-sleeve-for-braid-O-091 <p>Per 10.</p> <p>Ready to crimp double sleeves, for stainless steel braids and nylon or fluoro leader</p> <p>To be crimped with the sleeve tool to crimp without crushing!</p> https://www.bricoleurre.uk/product/double-sleeve-for-braid-O-114 <p>Per 10.</p> <p>Ready to crimp double sleeves, for stainless steel braids and nylon or fluoro leader</p> <p>To be crimped with the sleeve tool to crimp without crushing!</p> https://www.bricoleurre.uk/product/double-sleeves-clamp <p>Very robust sleeves clamp, and powerful thanks to its gear ratio.</p> <p>Also cuts the stainless steel braid or steel wire.</p> <p>traditionally sleeves are used for stainless steel braids, but more and more on fluoro leader lines.</p> https://www.bricoleurre.uk/product/emerillon-baril-chaine https://www.bricoleurre.uk/product/etriers-ou-eclisses https://www.bricoleurre.uk/product/exo-broken-rings-double-tower-stainless-steel-200-lb <p>per 10</p> <p>Stainless steel rings specially produced for bricoleurre&nbsp;according to our specifications.<br /> As with all the products we develop, these rings have been tested for several seasons in exotic fishing before being marketed.</p> <p>advantage 1: the quality of the stainless steel ! no rust after 2 years !</p> <p>advantage 2: these rings are &quot;compression&quot;, i. e. they remain tight even after several openings</p> <p>advantage 3: the central &quot;S&quot; ring makes a flat ring, not offering a grip on the attached parts to eventually get out of the broken ring.</p> https://www.bricoleurre.uk/product/exo-broken-rings-double-tower-stainless-steel-350-lb <p>per 10</p> https://www.bricoleurre.uk/product/exo-triple-tower-broken-rings <p>Per 10.</p> <p>stainless steel rings with triple tower. The small diameter of the stainless steel is compensated by a tripple coil winding. The advantage is to keep a high elasticity of the turns.</p> <p>the small diameter allows it to be used on some lures.<br /> &nbsp;</p> https://www.bricoleurre.uk/product/eyelets-for-leaded-head-x-100 <p>Brass fixing eyelet &Oslash; 1.25mm and length 16mm, to be placed in the mould before casting the lead. Especially suitable for the ARTICLE HEAD MOULD 25 A 75 G model 75015 and the JIG 20 A 60G MADAI MOULD model 75012. 100 units bag.</p> <p>&nbsp;</p> https://www.bricoleurre.uk/product/ecureuil https://www.bricoleurre.uk/product/ecureuil-v2 https://www.bricoleurre.uk/product/faceted-iridescent-beads-5-mm <p>Per 50.</p> https://www.bricoleurre.uk/product/fat-alien https://www.bricoleurre.uk/product/fat-bricocrank https://www.bricoleurre.uk/product/feuille-de-plomb-en-rouleau https://www.bricoleurre.uk/product/feutre-blanc-pour-leurres-durs https://www.bricoleurre.uk/product/feutre-a-leures-durs-pour-aerographe https://www.bricoleurre.uk/product/fil-de-plomb-a-lester https://www.bricoleurre.uk/product/filtres-pour-masques-msa-modele-2 https://www.bricoleurre.uk/product/fixe-leurre-ressort https://www.bricoleurre.uk/product/fixe-leurre-stinger https://www.bricoleurre.uk/product/flat-popper-to-decorate-100-g <p>Turned, balanced, sanded wooden lure, with 250/100th stainless steel frame, ready to be decorated. Exclusive to Bricoleurre.<br /> Length: 170 mm - Weight: 90 g<br /> This lure is delivered in raw wood.</p> <p>The 3-D holographic eyes to use are the 20 mm.</p> <p>Painting advice: make a white background paint to saturate the wood well, and create a good contrast for the following colours.</p> <p>Change the following colours from lightest to darkest (airbrush or spray paint can)</p> <p>Allow to dry well before varnishing with 2 coats of bricovernis.</p> https://www.bricoleurre.uk/product/flat-popper-to-decorate-160-g <p>Turned, balanced, sanded wooden lure, with 250/100th stainless steel frame, ready to be decorated. Exclusive to Bricoleurre.<br /> Length: 160 mm - Weight: 220 g<br /> This lure is delivered in raw wood.</p> <p>the 3-D holographic eyes to use are the 20 mm.</p> <p>Painting advice: make a white background paint to saturate the wood well, and create a good contrast for the following colours.</p> <p>change the following colours from lightest to darkest (airbrush or spray paint)</p> <p>let dry well before varnishing with 2 coats of bricovernis</p> https://www.bricoleurre.uk/product/flattened-round-headed-mould-2-to-16-g <p>2 - 4 - 6 - 8 - 11 - 14 to&nbsp;16 g.</p> https://www.bricoleurre.uk/product/floating-jerk-to-decorate <p>Turned, balanced, sanded wooden lure, with 250/100th stainless steel frame, ready to be decorated. Bricoleurre exclusivity.&nbsp;<br /> Weight: 57G</p> https://www.bricoleurre.uk/product/flotation-additive <p>20 g jar.<br /> Fine and light powder to mix with plastileurre&nbsp;to improve buoyancy.</p> <p>This product is made of&nbsp;microballoon glass.<br /> Given its extreme lightness (d=0.25), the risk of inhalation is high. It must be handled in accordance with the following rules.<br /> - wearing a safety mask equipped with combined filters classified A1B1E1-P3<br /> - wearing safety glasses<br /> - wearing gloves is strongly recommended</p> https://www.bricoleurre.uk/product/flowing-jerk-to-decorate <p>Turned, balanced, sanded wooden lure, with 250/100th stainless steel frame, ready to be decorated. Bricoleurre exclusivity.</p> <p>Weight: 74g</p> https://www.bricoleurre.uk/product/fluidized-bath-base-single <p>The base is equipped with an air valve.</p> https://www.bricoleurre.uk/product/fluidized-bath-kit <p>The fluidized bath kit includes:<br /> - a base equipped with a tap<br /> - an air pump 300l/h<br /> - 3 connecting pipes<br /> - a standard tank of &Oslash;60mm</p> <p>A high tank is available to paint lead seals up to 20cm long (spoons or jigs).</p> <p><a href="/post/bain-fluidise">DIRECTIONS FOR USE</a></p> <p><br /> The fluidized bath is used with our <a href="/store/leurres-souples/colorants/poudres">powdered lead dyestuffs</a>.</p> https://www.bricoleurre.uk/product/fluorescent-green-beads-6-mm <p>Per 50.</p> https://www.bricoleurre.uk/product/foam-block-pu-20-mm <p>30x30 cm.</p> https://www.bricoleurre.uk/product/foam-block-pu-30-mm <p>30x30 cm.</p> https://www.bricoleurre.uk/product/foam-block-pu-60-mm <p>30x30 cm.</p> https://www.bricoleurre.uk/product/french-palette-mepps-type https://www.bricoleurre.uk/product/fusion-pot-tank-5-kg <p>Stainless steel replacement tank for small melting pot model 5 Kg.</p> https://www.bricoleurre.uk/product/fluorescent-liquid-dye <p>Bottle of 25 ml.<br /> Opacifying liquid dye. Flash colors for dirty water. Do not mix them together.</p> https://www.bricoleurre.uk/product/gants-de-securite https://www.bricoleurre.uk/product/garlic-aroma <p>Bottle of 25 ml. Aroma compatible with the plastileurre. Do not put the aroma on during the heating!&nbsp;</p> <p>place your lures in a pastel bag, add a few drops of flavouring, close the bag and crush everything to distribute the flavour evenly.</p> <p>The aroma is compatible with the lure, and enters the lure from the outside.</p> <p>The advantage of aromatization in the mass is the longevity of the efficiency compared to a simple soaking.</p> https://www.bricoleurre.uk/product/gift-certificate-10-e https://www.bricoleurre.uk/product/giant-glitter-3mm <p>Bottle of 20 g.<br /> Polyester flakes to be mixed in the plastileurre. Very large format giving colourful reflections. Different colours can be mixed.</p> https://www.bricoleurre.uk/product/large-glitter-1mm <p>Bottle of 20 g.<br /> Polyester flakes to be mixed in the plastileurre. Large format giving coloured reflections (one blue side and the other green side). Top effect. Different colours can be mixed.</p> https://www.bricoleurre.uk/product/glitter-small-04mm <p>Bottle of 20 g.<br /> Polyester flakes to be mixed in the plastileurre. Small format giving colourful reflections. Different colours can be mixed.</p> https://www.bricoleurre.uk/product/glitter-sticks <p>Bottle of 20 ml.</p> https://www.bricoleurre.uk/product/grey-rtv-silicone <p>1 kg jar with catalyst (950g silicone + 50g catalyst).</p> <p>Disposable silicone (cannot be recycled) to make your own lure molds.<br /> The drying time depends on the amount of catalyst. High quality silicone with micron molding accuracy.</p> <p>Bricoleurre silicone is a polycondensation silicone elastomer, which is in the form of a viscous liquid. After mixing the 2 components, the working time is 15 minutes.<br /> The mixture gradually thickens and demoulding can be done in 2 hours.<br /> - Soft and homogeneous mass<br /> - Impression accuracy to the micron<br /> - Self-demolding<br /> - Resists 200 degrees C (do not use for lead)<br /> - Tearable (low tear)<br /> - Stretching: 150%.<br /> - Recommended dosage 2 to 5%, i. e. 2 to 5 g catalyst per 100 g RTV<br /> - Color: grey<br /> - Curing time: 3 hrs<br /> - Hardness: (shore A)28<br /> - Density: 1,245<br /> - Storage: 12 months in closed packaging<br /> - Solvent: White Spirit<br /> - Thinner: silicone oil (5 to 10% max.)</p> <p>Employment advice:<br /> - Wear suitable gloves. Avoid contact with eyes. In case of contact with eyes, rinse thoroughly with clean water. In case of irritation, consult a doctor.<br /> - Do not leave within reach of children<br /> - Do not ingest.</p> <p>USE :<br /> - Not suitable for use and food contact<br /> - Destined for prototypes and not for production</p> https://www.bricoleurre.uk/product/hamecon-texan-vis https://www.bricoleurre.uk/product/hamecons-a-anguillons https://www.bricoleurre.uk/product/heavy-composite-load-for-bricoresine-1-kg https://www.bricoleurre.uk/product/heavy-composite-load-for-bricoresine-3-kg <p>This heavy load allows the resin to be structured, making it more solid, preventing its retraction, and considerably reducing the cost per kg of the 3 Kg resin.</p> https://www.bricoleurre.uk/product/high-tank-for-fluidized-bath <p>This tank has an inner diameter of 34mm. It only fits on the base of the new fluidized bath.</p> https://www.bricoleurre.uk/product/ingot-shovel https://www.bricoleurre.uk/product/irise-film <p>Transparent plastic film giving iridescent reflections. Surface area: 1 m2</p> https://www.bricoleurre.uk/product/irise-colorant-powder <p>Bottle of 20 g.<br /> Powdered colouring agent giving an opaque effect, with iridescent colours varying according to the angle of vision.</p> https://www.bricoleurre.uk/product/jig-hook-for-leaded-head-90 <p>Per 50 from 1/0 to 8/0</p> <p>Strong iron hooks, with double black nickel coating for better corrosion resistance</p> https://www.bricoleurre.uk/product/jigs-a-decorer https://www.bricoleurre.uk/product/joint-de-rechange-pour-injecteur https://www.bricoleurre.uk/product/jupes-silicone-a-spinner https://www.bricoleurre.uk/product/kit-2-syringes-12-cc <p>kit of 2 syringes with colour code to avoid mixing. Allows a perfect and clean dosage at 50/50.</p> https://www.bricoleurre.uk/product/kit-2-syringes-3-cc <p>kit of 2 syringes with colour code to avoid mixing. Allows a perfect and clean dosage at 50/50.</p> https://www.bricoleurre.uk/product/kit-a-tetes-plombees https://www.bricoleurre.uk/product/kit-brochet-n2 https://www.bricoleurre.uk/product/kit-complet-aerographe https://www.bricoleurre.uk/product/kit-de-decoration-leurres-durs-copie https://www.bricoleurre.uk/product/kit-complet-double-injecteurs https://www.bricoleurre.uk/product/kit-de-decoration-leurres-durs https://www.bricoleurre.uk/product/kit-assemblage-double-injecteur https://www.bricoleurre.uk/product/kit-fc-lancon-120-avec-tp https://www.bricoleurre.uk/product/kit-sandre https://www.bricoleurre.uk/product/kit-tete-a-visser https://www.bricoleurre.uk/product/kit-de-depart-leurres-souples https://www.bricoleurre.uk/product/kakouy-shad-8 <p>8 cm soft lure mold excellent on the bar</p> https://www.bricoleurre.uk/product/kakouyshad-8cm-kit <p>The kakouyshad kit allows you to cast nearly 100 bar lures, pike, perch.</p> <p>This 10 cm shad created by bricoleurre is a real weapon for big bars, especially at the beginning of the season, when they are on small prey.</p> <p>the set is composed of:</p> <p>1 standard plastiflurorre<br /> 1 sardine powder dye<br /> 1 dark grey felt to make the back or decos<br /> 1 kakouyshad mold with 2 poses</p> https://www.bricoleurre.uk/product/kit-manushad-160 https://www.bricoleurre.uk/product/kit-manushad-70-truite https://www.bricoleurre.uk/product/large-round-popper-150-g-to-decorate <p>Turned, balanced, sanded wooden lure, with 250/100th stainless steel frame, ready to be decorated. Exclusive to Bricoleurre.<br /> Length: 170 mm - Weight: 150 g<br /> This lure can be delivered in raw wood.</p> <p>The 3-D holographic eyes to use are the 20 mm.</p> <p>Painting advice: make a white background paint to saturate the wood well, and create a good contrast for the following colours.</p> <p>Change the following colours from lightest to darkest (airbrush or spray paint can)</p> <p>Allow to dry well before varnishing with 2 coats of bricovernis.</p> https://www.bricoleurre.uk/product/lead-drop-shot-mould-18-to-18-g <p>Mould for drop-shot leads.<br /> Grammages: 1.8 g - 3.5 g - 5 g - 7 g - 10 g - 14g - 18 g.<br /> <a href="/product/emerillon-baril-20-mm-drop-shot">A n&deg;12 barrel swivel</a> is required to equip this lead.</p> https://www.bricoleurre.uk/product/lead-mold-pear-100-to-200-g <p>100 - 150 to&nbsp;200 G.</p> https://www.bricoleurre.uk/product/lead-triangle-mould-9-to-23-g <p>Mould for triangle seals to be jigged.<br /> Grammages: 9 g - 14g - 18 g and 23 g.<br /> A 6 mm eye can be glued on each side in a concave groove.</p> https://www.bricoleurre.uk/product/lests-mikashad-mould <p>RTV 139 silicone double shell mould.<br /> These weights of 3 g - 5.2 g - 9 g - 17 g - 17 g and 24.4 g will be inserted into the head mould ref. 75003 and positioned using 2 strands of piano wire ref. 77079.</p> <p>These 5 weights will produce leaded heads of 9 g - 11 g - 14 g - 21 g and 28 g.</p> https://www.bricoleurre.uk/product/light-composite-load-for-bricoresine <p>80 g bottle.</p> <p>This product is made of glass microballoons.<br /> Given its extreme lightness (d=0.25), the risk of inhalation is high. It must be handled in accordance with the following rules.<br /> - wearing a safety mask equipped with combined filters classified A1B1E1-P3<br /> - wearing safety glasses<br /> - wearing gloves is strongly recommended</p> https://www.bricoleurre.uk/product/long-texan-hooks-reinforced <p>Per 25</p> https://www.bricoleurre.uk/product/lunettes-de-protection https://www.bricoleurre.uk/product/madai-jig-mould-20-to-60g <p>Another Bricoleurre exclusivity!<br /> Cast your own Madai jigs! Finish with our plastic skirts, 3D eyes and assist-hooks by adapting the length of the hollow braid.<br /> To animate very gently by undulating. Feel free to use fluorescent colours.<br /> Can also be used as a classic leaded head.<br /> Grammages: 20g - 40g and 60g.</p> https://www.bricoleurre.uk/product/masque-de-securite-msa-modele-2 https://www.bricoleurre.uk/product/melting-pot-for-lead-10-kg <p><img src="/pub/produits/attention.png" style="padding: 5px; border: 0px currentColor; border-image: none; margin-right: 10px; float: left;" /></p> <p>This 700-watt melting pot can melt 10 kg of lead in 20 minutes. A thermostat is used to adjust the heating temperature. The casting valve, located 10 cm above the base, allows the lead flow rate to be adjusted.</p> <p>The unit is supplied with a 3-wire power cord that will require a plug complying with NF C 15-100 to be connected to a 220-volt power supply at its end.</p> <p>Guaranteed 2 years.</p> <p>Its use does not exclude compliance with the basic safety rules for handling molten metals (wearing masks, gloves, glasses and cotton clothing).</p> <p>Do not leave within reach of children during use.</p> <p><a href="/pub/pdf/mode_emploi_pot_de_fusion.pdf">&nbsp;How to use the fusion pot</a></p> https://www.bricoleurre.uk/product/melting-pot-for-lead-5-kg <p><img alt="attention.png" src="/pub/produits/attention.png" style="margin: 0px 1em 1em 0px; float: left;" /></p> <p>This 500 watt melting pot can melt 5 kg of lead in 20 minutes. A thermostat is used to adjust the heating temperature. The casting valve, located 10 cm above the base, allows the lead flow rate to be adjusted.</p> <p>The unit is supplied with a 3-wire power cord that will require a plug complying with NF C 15-100 to be connected to a 220-volt power supply at its end.</p> <p>Guaranteed 2 years.</p> <p>Its use does not exclude compliance with the basic safety rules for handling molten metals (wearing masks, gloves, glasses and cotton clothing).</p> <p>Do not leave within reach of children during use.</p> <p><a href="/mode_emploi_pot_de_fusion.pdf">&nbsp;How to use the fusion pot</a></p> https://www.bricoleurre.uk/product/mikashad-head-mold <p>RTV 139 silicone double shell mould.<br /> It can be filled with lead to obtain a 52 g leaded head or a ballast made with the 75004 ballast mold and complete the remaining volume with Bricor&eacute;sine.</p> <p>It must be equipped with a 60&deg; jig hook in size 5/0 ref. 77117.<br /> 2 cavities.</p> https://www.bricoleurre.uk/product/mikashad-kit <p>This kit of 3 molds allows you to create a 17 cm soft lure of the shad type with a weight of 28 g and a leaded head.<br /> <img src="/pub/produits/mika_complet.jpg" /><br /> <img src="/pub/produits/mikarose.jpg" /><br /> <br /> This leaded head consists of a lead ballast embedded in a polyurethane resin shell. The ballast is manufactured in a 5-cavity mould to obtain leaded heads of 9 g - 11 g - 14g - 21 g and 28 g.</p> <p>The lead mould must be equipped with a jig hook 60&deg; VMC 7161 in size 5/0 ref. 77117.</p> <p>The ballast mould must be equipped with &Oslash; 1 mm steel wire positioning rods ref. 77079.</p> <p>This new concept offers the possibility to vary:<br /> - the density of the resin cast in the lead-head mould, adding light or heavy fillers.<br /> - the weight of the ballast inserted in the lead head (5 grammages).<br /> - the hardness of the shad body according to the type of Plastileurre used (standard or rigid).<br /> - the buoyancy of the lure by adding light composite load to the body.<br /> - armament: jig hook or articulated mount.</p> <p>This lure can be used in vertical fishing or in rowing and throwing.</p> <p>Ref: 79007 The MikaShad Kit is composed of :<br /> - a lead-head mould in RTV 139 ref. 75003<br /> - a ballast mould in RTV 139 ref. 75004<br /> - a shad mould in RTV ref. 75005<br /> Value: 80&euro;<br /> Discounted price: 70&euro;</p> <p><a href="/pub/pdf/notice_mikashad.pdf">Download the instructions for use.</a></p> https://www.bricoleurre.uk/product/mould-with-articulated-heads-25-to-75-g <p>A selection of 4 grammages from 25 to 75g in the shape of a fish head. Advantage: possibility of mounting an articulated hook during casting.<br /> Grammages: 25g - 45g - 60g and 75g.</p> https://www.bricoleurre.uk/product/mould-with-hoof-heads-35-to-21g <p>The hoof shape is ideal for &quot;vertical&quot; fishing with very slow animation.<br /> Placed on the bottom, the lure, tail in the air, perfectly imitates a forage fish feeding on the bottom.<br /> Grammages: 6 hoof heads of 3.5g - 7g - 10g - 14g - 18g and 21g.</p> <p><img alt="hameÁons moule sabot" src="/pub/produits/ham_75016.jpg" /></p> https://www.bricoleurre.uk/product/moule-a-big-bait-200 https://www.bricoleurre.uk/product/moule-a-big-rondo-250 https://www.bricoleurre.uk/product/moule-a-bricojerk https://www.bricoleurre.uk/product/bricobuster https://www.bricoleurre.uk/product/moule-a-bricofin-s https://www.bricoleurre.uk/product/moule-a-bricowibe https://www.bricoleurre.uk/product/crislug https://www.bricoleurre.uk/product/moule-a-double-head-spinner https://www.bricoleurre.uk/product/moule-a-kilpop https://www.bricoleurre.uk/product/moule-a-lancon-fc-120 https://www.bricoleurre.uk/product/moule-a-lest-grenade https://www.bricoleurre.uk/product/moule-a-lests-secable https://www.bricoleurre.uk/product/moule-a-mouse-trailer https://www.bricoleurre.uk/product/moule-a-plomb-olive-percee-12-a-30g https://www.bricoleurre.uk/product/moule-a-queue-de-brico-balam https://www.bricoleurre.uk/product/moule-a-slimshad https://www.bricoleurre.uk/product/moule-a-slow-jig https://www.bricoleurre.uk/product/moule-a-tenya-en-rtv https://www.bricoleurre.uk/product/moule-a-tete-a-visser https://www.bricoleurre.uk/product/moule-a-tete-lancon-fc-120 https://www.bricoleurre.uk/product/moule-a-tete-lancon-fc-180 https://www.bricoleurre.uk/product/moule-a-tete-lancon-max https://www.bricoleurre.uk/product/moule-a-tete-plombee-manushad-160 https://www.bricoleurre.uk/product/moule-a-tete-ronde-pour-hamecon-7-0-et-8-0 https://www.bricoleurre.uk/product/moule-a-tete-rugby-en-rtv https://www.bricoleurre.uk/product/moule-a-tete-sabot-40-50-g https://www.bricoleurre.uk/product/moule-a-tete-thon https://www.bricoleurre.uk/product/moule-a-zander-finesse https://www.bricoleurre.uk/product/moule-corps-mikashad https://www.bricoleurre.uk/product/moule-plaque-x10-manushad https://www.bricoleurre.uk/product/moule-resine-fbs-shad-2-couleurs https://www.bricoleurre.uk/product/moule-rtv-multiformes-pour-kit-depart https://www.bricoleurre.uk/product/moule-rtv-pour-tete-fbs-shad https://www.bricoleurre.uk/product/moule-rtv-pour-vibration-spintail https://www.bricoleurre.uk/product/tete-shad-v2 https://www.bricoleurre.uk/product/manushad-12-cm <p>Soft lure mold created by Bricoleurre and tested at sea with excellent results on the bar, and even on the tarpon!</p> <p>recommended plastileurre for casting: standard plastileurre</p> https://www.bricoleurre.uk/product/manushad-12cm-kit <p>complete set for the casting of the Manushad, a lure that was developed by Bricoleurre, and successfully tested for 2 years on the bar, place, st stone, lean,..., and even on a tarpon of 50 kg + !!!</p> <p>the set includes:</p> <p>1 Manushad mould 12 cm<br /> 1 litre of standard plastileurre<br /> 1 sandeel dye for the back<br /> 1 a white powder dye and holographic flakes for the belly<br /> everything to make more than 80 lures!</p> https://www.bricoleurre.uk/product/martroger-shad <p>Soft lure mold ideal for all fishermen, whether at sea or in freshwater.</p> <p>possible casting in vertical sizes <a href="tel:150/120/100">150/120/100</a></p> <p>Bricoleurre injector recommended for 70 and 50</p> https://www.bricoleurre.uk/product/martroger-shad-kit https://www.bricoleurre.uk/product/melange-vadouvan https://www.bricoleurre.uk/product/moule https://www.bricoleurre.uk/product/neutral-mass-for-casting-lures <p>100 g.</p> https://www.bricoleurre.uk/product/octopus-11-cm <p>Per 5.</p> https://www.bricoleurre.uk/product/oeillet-a-vis-pour-leurre-en-bois https://www.bricoleurre.uk/product/p-tiloup-shad https://www.bricoleurre.uk/product/paillettes-micro-01mm https://www.bricoleurre.uk/product/palette-a-chatterbait https://www.bricoleurre.uk/product/palette-colorado-argent https://www.bricoleurre.uk/product/palette-colorado-or https://www.bricoleurre.uk/product/palette-saule-argent https://www.bricoleurre.uk/product/pince-a-tresse-et-anneaux-brises https://www.bricoleurre.uk/product/pipette-bottle-30-ml <p>Empty pipette bottle with cap.</p> https://www.bricoleurre.uk/product/plastileurre-eco https://www.bricoleurre.uk/product/plastileurre-icing <p>Plastileurre glazing is an exclusive bricoleurre composition for fixing powder dyes on the surface of a lure by dipping.</p> https://www.bricoleurre.uk/product/plastileurre-softener <p>1 litre bottle. Additive to soften the plastileurre, all versions.</p> https://www.bricoleurre.uk/product/pochoir-ecailles-pour-decoration-leurres https://www.bricoleurre.uk/product/poids-balle-laiton-pour-cuilleres https://www.bricoleurre.uk/product/poids-balle-raye https://www.bricoleurre.uk/product/polo-bricoleurre https://www.bricoleurre.uk/product/polo-rugby-bricoleurre https://www.bricoleurre.uk/product/popper-cone-flat-small-100-g <p>Turned, balanced, sanded wooden lure with 250/100th stainless steel frame. Exclusive Bricoleurre!</p> <p>These lures are decorated and varnished by hand by us.<br /> Weight: 100 g<br /> &nbsp;4 colours available: rifle, pink head black, pink, malboro.</p> <p>if you want another color, buy the model to decorate, and make your own creation!</p> https://www.bricoleurre.uk/product/popper-flute-140-g <p>Turned, balanced, sanded wooden lure with 250/100th stainless steel frame. Exclusive to Bricoleurre. Weight: 140g</p> <p>Available in 4 colours: rifle, pink head black, malboro and pink.</p> <p>its shape and balance allow unusual throws by loading the rod well!</p> <p>Animation: like a flapper, deep down the surface bowls!</p> https://www.bricoleurre.uk/product/popper-with-flat-cone-160-g <p>Turned, balanced, sanded wooden lure with 250/100th stainless steel frame. Bricoleurre Exclusivity!</p> <p>These lures are decorated and varnished by hand by us.<br /> Weight: 160 g<br /> &nbsp;4 colours available: rifle, pink head black, pink, malboro.</p> <p>if you want another color, buy the model to decorate, and make your own creation!<br /> &nbsp;</p> https://www.bricoleurre.uk/product/pot-pour-aerographe-et-kit-nettoyage https://www.bricoleurre.uk/product/powder-coating-for-lead-silver-glitter https://www.bricoleurre.uk/product/powder-dye-for-lead-70g <p>Powdered dye for lead.</p> https://www.bricoleurre.uk/product/precision-balance <p>Maximum Weight: 3 kg<br /> Accuracy: 0.1g<br /> Blue backlit LCD display<br /> Automatic switch-off at choice: 0, 2, 5, 8 minutes</p> <p>Automatic tare<br /> Units: g, tl, ounce(Oz), ib, ct, dwt<br /> Batteries: 6*AA<br /> Power supply provided: 6v transformer<br /> Size: 215*153*40 mm</p> https://www.bricoleurre.uk/product/presse-a-moules https://www.bricoleurre.uk/product/perch-6 <p>Its incredibly natural and fluid swimming moves a large volume of water while being silent, you can punctuate it with a few more or less long breaks in order to slow down your fishing action as much as possible and thwart the mistrust of the most educated fish, which are often the largest.<br /> &nbsp;</p> https://www.bricoleurre.uk/product/phosphorescent-colouring-powder <p>Phosphorescent powder after exposure to light. The most convenient way is to use flash light before launching the lure.</p> https://www.bricoleurre.uk/product/piece-de-rechange-pour-twistech-moyen https://www.bricoleurre.uk/product/pike-kit <p>A complete manufacturing kit to make a high rolling manushad 190 (19 cm)</p> <p>this kit is composed of:</p> <p>manushad mold 190<br /> rugby head mold 25/30 g<br /> fluorescent chartreuse powder coloring<br /> fluorescent orange powder coloring<br /> fluorescent green powder dye<br /> metallic gray sequin 1 mm<br /> 3d eyes 6mm<br /> 50 jig hooks 90&deg; 7/0<br /> plastileurre 1 L standard<br /> 2 Beakers 250 ML<br /> the normal cost of the set is 143&euro;</p> <p>the kit, worth &euro;143, is EXCEPTIONALLY offered to you at &euro;120.70!</p> https://www.bricoleurre.uk/product/plastiline <p>Special precision modelling paste to sculpt your own models of lures or leaded heads and serve as an impression to make the moulds.<br /> - softens in heat and melts into a pan.<br /> - 100% reusable<br /> - keeps its volume<br /> - does not harden<br /> - does not dry out<br /> - non-toxic.</p> https://www.bricoleurre.uk/product/pollock-kit <p>This kit was created for winter offshore outings</p> <p>Crislug&reg; has proven itself on marine predators, bass, lean predators, and especially on the fraind place of the &quot;slug&quot; shape in xxl model..</p> <p>this kit includes</p> <p>1/ a crislug 220 mold in RTV</p> <p>2/ mold for shad V2 jig head 50/60 g</p> <p>3/ a bag of 60&deg; jig hooks in size 5/0</p> <p>4/ a liquid red dye</p> <p>5/ a fluorescent orange coloring (to be dosed lightly to &quot;wake up&quot; the red) It is also excellent on cod...</p> <p>6/ dark gray sequin for the back</p> <p>7/ A 100 ml beaker</p> <p>8/ a soft plastilure: the softer the lure, the better the swimming! DIY tip: cut a strip of gauze measuring 1 cm by 3 cm. sink your stomach? place the strip on the first 5 cm</p> <p>9/ pink octopus 5 cm: to assemble as a teaser! it is extremely effective on the spot. It often happens that it only catches on the teaser, even for fish weighing more than 5/6 kg!</p> https://www.bricoleurre.uk/product/queue-de-rat-dragon-tail https://www.bricoleurre.uk/product/r-craft-t-55 <p>The Rcraft55 is a small stocky lure of 5.5cm for 6gr, noisy it will be ideal for tracking trout but also predators like perch. It is available in 6 colours. Its strong rolling will seduce the most suspicious predators, to try it is to adopt it.</p> https://www.bricoleurre.uk/product/r-max-80 <p>8 cm flowing sound bib lure for 11g.</p> https://www.bricoleurre.uk/product/radeshad-13-cm-kit <p>A complete set for casting the RadeShad, a 12 and 13 cm lure that was developed by Bricoleurre, and successfully tested for 2 years on pike-perch and pike</p> <p>the set includes:</p> <p>1 RadeShad mould 12 and 13 cm<br /> 1 injector<br /> 1 litre of standard plastileurre<br /> 1 white powder dye<br /> 1 holographic glitter for the belly 1mm<br /> 1 felt Sandeel<br /> 1 dark grey felt pen<br /> everything to make more than 80 lures!</p> <p>Value 131 &euro; Discounted price 110 &euro;</p> https://www.bricoleurre.uk/product/rattles-big <p>Bag of 50 units.<br /> Length 21 mm, diameter 5 mm, weight 0.57 g, 1 single log.<br /> Glass tube with metal ball to be inserted into the lures during casting. The bigger the rattle, the lower the sound.</p> https://www.bricoleurre.uk/product/rattles-giant <p>Bag of 25 units.<br /> Length 15 mm, diameter 8 mm, weight 1.5 g, 1 single log.<br /> Glass tube with metal ball to be inserted into the lures during casting. The bigger the rattle, the lower the sound.</p> https://www.bricoleurre.uk/product/rattles-medium <p>Bag of 50 units.<br /> Length 20 mm, diameter 4 mm, weight 0.26 g, 3 balls.<br /> Glass tube with metal balls to be inserted into the lures during casting. The bigger the rattle, the lower the sound.</p> https://www.bricoleurre.uk/product/rattles-small <p>Bag of 50 units.<br /> Length 18 mm, diameter 3 mm, weight 0.2 g, 3 balls.<br /> Glass tube with metal balls to be inserted into the lures during casting. The bigger the rattle, the lower the sound.</p> https://www.bricoleurre.uk/product/red-fluorescent-beads-6-mm <p>Per 50.</p> https://www.bricoleurre.uk/product/red-lunimeous-tubes <p>By 20 units - 20 mm long - 2.4 mm in diameter.<br /> The plastic tube, which is sealed tightly, contains two chemical compounds separated by an easy-to-break glass bulb. The twisting of the plastic tube causes the bulb to break, causing the two products to mix, resulting in the production of light by fluorescence. This glow decreases at low temperatures, it is more intense with heat. It can last up to 8 hours.<br /> The products are neither toxic nor flammable. Their storage period before use varies from two to five years.<br /> Due to its small diameter, this tube can be inserted, like a rattle, into a translucent flexible lure to make it bright even at great depth. It can also be glued on a hard lure with cyano glue</p> https://www.bricoleurre.uk/product/resistance-for-5kg-10-lb-melting-pot <p>Spare part for melting pot 10 lb / 5kg</p> https://www.bricoleurre.uk/product/resistance-for-melting-pot-10kg-20lb <p>Spare part for melting pot .20lb /10 kg</p> https://www.bricoleurre.uk/product/ressort-pour-tete-a-visser https://www.bricoleurre.uk/product/rivet-pour-buzzer-et-helices https://www.bricoleurre.uk/product/rtv-mold-fbs-head-120 <p>A format specially developed for the FBS, which accentuates the rolling natel of the lure.</p> https://www.bricoleurre.uk/product/rubber-jig-spinner-mould-35-t <p>Rubber jig and spinner mould.<br /> 3.5 - 7 - 10 - 10 - 14 and 18 g.</p> https://www.bricoleurre.uk/product/radeshad-12-13-cm <p>creation E RADENAC exclusive for bricoleurre</p> <p>Mould with flexible double imprint lure excellent for pike, pike-perch and bass</p> <p>Injection lures for a better finish, and standard plastileurre.</p> <p>decoration to be done with the special soft lures felts bricoleurre.</p> https://www.bricoleurre.uk/product/red-rtv-silicone <p>Silicone to make your own plumbing moulds. The drying time depends on the amount of catalyst. High quality silicone with micron molding accuracy. Resists over 320 degrees C.</p> <p>Bricoleurre lead silicone is a polycondensation silicone elastomer, which is in the form of a viscous liquid. After mixing the 2 components, the working time is a few minutes, the mixture gradually thickens, and the demoulding can be done in a few hours.<br /> - Flexible, homogeneous and resistant mass<br /> - Impression accuracy to the micron<br /> - Self-demolding<br /> - Resists 320 degrees C for lead, epoxy resins<br /> - Tear-proof<br /> - Crosslinking time at 20 degrees C, catalyst at 10%: 24H<br /> - Recommended dosage 5%, i. e. 5 g catalyst per 100 g RTV lead<br /> - Color: red<br /> - Curing: 24H<br /> - Hardness: (shore A) 27<br /> - Storage: 12 months in closed packaging.<br /> - Solvent: White Spirit<br /> - Thinner: silicone oil (5 to 10% max.)</p> <p>Employment advice:<br /> - Wear suitable gloves<br /> - Avoid contact with eyes. In case of contact with eyes, rinse thoroughly with clean water. In case of irritation, consult a doctor.<br /> - Do not leave within reach of children.<br /> - Do not ingest.</p> <p>USE :<br /> - Not suitable for use and food contact.</p> <p>5 kg jar with catalyst (4,750 Kg of silicone + 250g of catalyst).</p> https://www.bricoleurre.uk/product/safety-glove <p>Sold by the unit.<br /> Seamless knitted ambidextrous glove, double layer cotton/acrylic.<br /> Brown Nitrile coating in N on both sides for good grip.<br /> Contact heat protection up to 250&deg;C.<br /> Applications: Handling of hot objects.</p> <p>Mechanical standards: EN134X.<br /> Heat and fire standards: EN407/X241XX.</p> <p>One size only: 10XL</p> https://www.bricoleurre.uk/product/salt-for-ls <p>Bottle of 100 g.<br /> Special salt that does not yellow the plastileurre, to increase the density of the plastileurre&nbsp;and make the lure more fluid.<br /> &nbsp;</p> https://www.bricoleurre.uk/product/shad-head-mold-v2-rtv <p>These red RTV moulds are used to cast the famous V2 shad heads created by BRICOLEURRE.</p> <p>fast descending shape, large eye spots, excellent balance, they have proven themselves by winning many competitions!</p> <p>Less expensive than cast aluminium moulds, they have a better surface finish.</p> <p>On the other hand, it is advisable to quickly talc between castings, especially for large sizes, in order to preserve the longevity of the mold.</p> <p>Allow the mold to cool well between 2 pours.</p> https://www.bricoleurre.uk/product/shad-mould-v2-30-45g <p>The new Bricoleurre moulds with leaded heads can be adapted to many soft lures on the market: blackminnow, mother worm, nitro shad, etc.</p> <p>Its unique shape allows it to penetrate the water very well, so it descends quickly and has a clear impact on the bottom. This makes it possible to fish lighter while maintaining good contact with the bottom. In addition, a space is provided for inserting large 3D holographic eyes (8 to 10 mm), a signal of attack in predators.</p> <table border="0" cellpadding="0" cellspacing="0" style="width: 234pt; margin-left: -1.15pt; border-collapse: collapse;" width="312"> <tbody> <tr> <td nowrap="nowrap" style="padding: 0cm 3.5pt; border: 1pt solid windowtext; border-image: none; width: 114pt; height: 15pt;" valign="bottom" width="152"> <p>moule shad V2</p> </td> <td nowrap="nowrap" style="border-width: 1pt 1pt 1pt medium; border-style: solid solid solid none; border-color: windowtext windowtext windowtext currentColor; padding: 0cm 3.5pt; border-image: none; width: 60pt; height: 15pt;" valign="bottom" width="80"> <p>ham jig 90&deg;</p> </td> <td nowrap="nowrap" style="border-width: 1pt 1pt 1pt medium; border-style: solid solid solid none; border-color: windowtext windowtext windowtext currentColor; padding: 0cm 3.5pt; border-image: none; width: 60pt; height: 15pt;" valign="bottom" width="80"> <p>ham jig 60&deg;</p> </td> </tr> <tr> <td nowrap="nowrap" style="border-width: medium 1pt 1pt; border-style: none solid solid; border-color: currentColor windowtext windowtext; padding: 0cm 3.5pt; border-image: none; width: 114pt; height: 15pt;" valign="bottom" width="152"> <p>&nbsp;</p> </td> <td nowrap="nowrap" style="border-width: medium 1pt 1pt medium; border-style: none solid solid none; border-color: currentColor windowtext windowtext currentColor; padding: 0cm 3.5pt; width: 60pt; height: 15pt;" valign="bottom" width="80"> <p>&nbsp;</p> </td> <td nowrap="nowrap" style="border-width: medium 1pt 1pt medium; border-style: none solid solid none; border-color: currentColor windowtext windowtext currentColor; padding: 0cm 3.5pt; width: 60pt; height: 15pt;" valign="bottom" width="80"> <p>&nbsp;</p> </td> </tr> <tr> <td nowrap="nowrap" style="border-width: medium 1pt 1pt; border-style: none solid solid; border-color: currentColor windowtext windowtext; padding: 0cm 3.5pt; border-image: none; width: 114pt; height: 15pt;" valign="bottom" width="152"> <p>10/15g to come</p> </td> <td nowrap="nowrap" style="border-width: medium 1pt 1pt medium; border-style: none solid solid none; border-color: currentColor windowtext windowtext currentColor; padding: 0cm 3.5pt; width: 60pt; height: 15pt;" valign="bottom" width="80"> <p>1/0 and&nbsp;2/0</p> </td> <td nowrap="nowrap" style="border-width: medium 1pt 1pt medium; border-style: none solid solid none; border-color: currentColor windowtext windowtext currentColor; padding: 0cm 3.5pt; width: 60pt; height: 15pt;" valign="bottom" width="80"> <p>1/0 and 2/0</p> </td> </tr> <tr> <td nowrap="nowrap" style="border-width: medium 1pt 1pt; border-style: none solid solid; border-color: currentColor windowtext windowtext; padding: 0cm 3.5pt; border-image: none; width: 114pt; height: 15pt;" valign="bottom" width="152"> <p>18/25g</p> </td> <td nowrap="nowrap" style="border-width: medium 1pt 1pt medium; border-style: none solid solid none; border-color: currentColor windowtext windowtext currentColor; padding: 0cm 3.5pt; width: 60pt; height: 15pt;" valign="bottom" width="80"> <p>2/0 and 3/0</p> </td> <td nowrap="nowrap" style="border-width: medium 1pt 1pt medium; border-style: none solid solid none; border-color: currentColor windowtext windowtext currentColor; padding: 0cm 3.5pt; width: 60pt; height: 15pt;" valign="bottom" width="80"> <p>2/0 and&nbsp;3/0</p> </td> </tr> <tr> <td nowrap="nowrap" style="border-width: medium 1pt 1pt; border-style: none solid solid; border-color: currentColor windowtext windowtext; padding: 0cm 3.5pt; border-image: none; width: 114pt; height: 15pt;" valign="bottom" width="152"> <p>30/40g</p> </td> <td nowrap="nowrap" style="border-width: medium 1pt 1pt medium; border-style: none solid solid none; border-color: currentColor windowtext windowtext currentColor; padding: 0cm 3.5pt; width: 60pt; height: 15pt;" valign="bottom" width="80"> <p>4/0 and 5/0</p> </td> <td nowrap="nowrap" style="border-width: medium 1pt 1pt medium; border-style: none solid solid none; border-color: currentColor windowtext windowtext currentColor; padding: 0cm 3.5pt; width: 60pt; height: 15pt;" valign="bottom" width="80"> <p>3/0 and 4/0</p> </td> </tr> <tr> <td nowrap="nowrap" style="border-width: medium 1pt 1pt; border-style: none solid solid; border-color: currentColor windowtext windowtext; padding: 0cm 3.5pt; border-image: none; width: 114pt; height: 15pt;" valign="bottom" width="152"> <p>50/60g</p> </td> <td nowrap="nowrap" style="border-width: medium 1pt 1pt medium; border-style: none solid solid none; border-color: currentColor windowtext windowtext currentColor; padding: 0cm 3.5pt; width: 60pt; height: 15pt;" valign="bottom" width="80"> <p>6/0 and 7/0</p> </td> <td nowrap="nowrap" style="border-width: medium 1pt 1pt medium; border-style: none solid solid none; border-color: currentColor windowtext windowtext currentColor; padding: 0cm 3.5pt; width: 60pt; height: 15pt;" valign="bottom" width="80"> <p>4/0 and&nbsp;5/0</p> </td> </tr> <tr> <td nowrap="nowrap" style="border-width: medium 1pt 1pt; border-style: none solid solid; border-color: currentColor windowtext windowtext; padding: 0cm 3.5pt; border-image: none; width: 114pt; height: 15pt;" valign="bottom" width="152"> <p>80/100g</p> </td> <td nowrap="nowrap" style="border-width: medium 1pt 1pt medium; border-style: none solid solid none; border-color: currentColor windowtext windowtext currentColor; padding: 0cm 3.5pt; width: 60pt; height: 15pt;" valign="bottom" width="80"> <p>7/0</p> </td> <td nowrap="nowrap" style="border-width: medium 1pt 1pt medium; border-style: none solid solid none; border-color: currentColor windowtext windowtext currentColor; padding: 0cm 3.5pt; width: 60pt; height: 15pt;" valign="bottom" width="80"> <p>6/0 and 7/0</p> </td> </tr> <tr> <td nowrap="nowrap" style="border-width: medium 1pt 1pt; border-style: none solid solid; border-color: currentColor windowtext windowtext; padding: 0cm 3.5pt; border-image: none; width: 114pt; height: 15pt;" valign="bottom" width="152"> <p>120/150 g</p> </td> <td nowrap="nowrap" style="border-width: medium 1pt 1pt medium; border-style: none solid solid none; border-color: currentColor windowtext windowtext currentColor; padding: 0cm 3.5pt; width: 60pt; height: 15pt;" valign="bottom" width="80"> <p>8/0</p> </td> <td nowrap="nowrap" style="border-width: medium 1pt 1pt medium; border-style: none solid solid none; border-color: currentColor windowtext windowtext currentColor; padding: 0cm 3.5pt; width: 60pt; height: 15pt;" valign="bottom" width="80"> <p>7/0 and 8/0</p> </td> </tr> </tbody> </table> https://www.bricoleurre.uk/product/sickle-aberdeen-bc <p>Per 50</p> https://www.bricoleurre.uk/product/single-hook-with-pins <p><strong>Per 25</strong></p> https://www.bricoleurre.uk/product/single-hook-without-pins <p><strong>Per 25</strong></p> https://www.bricoleurre.uk/product/slug-mould-v2 <p>mould from the successful V2 lineage, created by bricoleurre. This elongated shape was developed for slugs and other elongated lures (crazy sand eel, manushad, sayori shad, etc.)</p> <p>very fast descent, and adapted to large animation prints;</p> <p>to be mounted with jig hooks 90&deg; long shaft 3/0 or 4/0</p> <p>eye diameter 6 mm white or red</p> https://www.bricoleurre.uk/product/small-fluo-glitters <p>New small model sequins to send dee fluo flahs all over the place</p> <p>Ideal for turbid waters</p> <p>can be used alone or mixed with other glitter, other dyes, powders or liquids.</p> <p>top effect on jigs with the bricovernis....</p> https://www.bricoleurre.uk/product/small-rond-popper-100-g-to-decorate <p>Turned, balanced, sanded wooden lure, with 250/100th stainless steel frame, ready to be decorated. Exclusive to Bricoleurre.<br /> Length: 150 mm - Weight: 100 g<br /> This lure is delivered in raw wood.</p> <p>the 3-D holographic eyes to use are the 20 mm.</p> <p>Painting advice: make a white background paint to saturate the wood well, and create a good contrast for the following colours.</p> <p>change the following colours from lightest to darkest (airbrush or spray paint)</p> <p>let dry well before varnishing with 2 coats of bricovernis</p> https://www.bricoleurre.uk/product/small-round-popper-100-g <p>Turned, balanced, sanded wooden lure with 250/100th stainless steel frame. Exclusive Bricoleurre!</p> <p>These lures are decorated and varnished by hand by us.<br /> Length: 170 mm - Weight: 100 g<br /> &nbsp;4 colours available: rifle, pink head black, pink, malboro.</p> <p>if you want another color, buy the model to decorate, and make your own creation!</p> <p>&nbsp;</p> https://www.bricoleurre.uk/product/special-soft-lure-coloring-felt-pen <p>For each colour, we present several shades, allowing us to make gradients.</p> <p>The blender is a kind of diluent, allowing to bind colours to each other, or to mix it.</p> <p>Several coats can be applied on top of each other, taking care to allow them to dry between each other, to obtain a denser shade.</p> <p>The assembly can be fixed with a glaze layer, but this is not necessary, unlike colouring powders.</p> https://www.bricoleurre.uk/product/split-chevrotines-mould-11-to-46g <p>A Bricoleurre exclusivity!<br /> Finally a mould adapted to make large split buckshotters, for &quot;drachko&quot; sea mounts, or to pinch on the bottom of the line.<br /> Grammages: 11g - 16g - 24g - 34g and 46g.</p> https://www.bricoleurre.uk/product/stainless-steel-wire-right <p>10 straight rods of 1 m.</p> https://www.bricoleurre.uk/product/stainless-steel-wire-roller <p>10m roll</p> <p>These stainless steel wire&nbsp;are particularly suitable for different fishing fixtures (articulated leaded heads, &quot;drackho&quot; fixtures, etc.), especially with the help of twistech, which allows a perfect winding!</p> https://www.bricoleurre.uk/product/standard-tank-for-fluidized-bath <p>This tank has a diameter of 60 mm. It is equipped with a cover at both ends. It only fits on the base of the new fluidized bath.</p> https://www.bricoleurre.uk/product/starter-kit <p>This kit has been designed to allow beginners to start making soft molds and lures. With the five colours and two glitter colours, you can achieve a variety of results. Rattles are there to make the decoys sound.</p> <p align="justify"><a href="/pub/pdf/mode_emploi_kit_debutant.pdf">A user manual is available for download.</a></p> <div class="texte_tb">&nbsp;<strong> With this kit, you can make about 200 slugs of 11 cm and 66 shads of 12 cm.</strong></div> <table align="center" style="border: 0px solid silver; border-image: none; border-collapse: collapse;" width="450"> <tbody> <tr class="chapeau"> <td class="text_chapeau" colspan="3" style="border: 0px solid silver; border-image: none;">&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; SARTER KIT (price VAT)</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; border-image: none;" width="20%">75001</td> <td style="border: 1px solid silver; border-image: none;" width="60%">RTV WHITE SILICONE FOR SOFT LURE MOULDS</td> <td style="border: 1px solid silver; border-image: none;" width="20%">34.00&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; border-image: none;" width="20%">71001</td> <td style="border: 1px solid silver; border-image: none;" width="60%">SOFT PLASTILEURRE LITRE</td> <td style="border: 1px solid silver; border-image: none;" width="20%">19.00&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; border-image: none;" width="20%">71007</td> <td style="border: 1px solid silver; border-image: none;" width="60%">HARD PLASTILEURRE LITRE</td> <td style="border: 1px solid silver; border-image: none;" width="20%">19.00&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; border-image: none;" width="20%">72025</td> <td style="border: 1px solid silver; border-image: none;" width="60%">COLORANT LIQUID BLACK</td> <td style="border: 1px solid silver; border-image: none;" width="20%">4.00&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; border-image: none;" width="20%">72026</td> <td style="border: 1px solid silver; border-image: none;" width="60%">COLORANT LIQUID BLUE</td> <td style="border: 1px solid silver; border-image: none;" width="20%">4.00&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; border-image: none;" width="20%">72030</td> <td style="border: 1px solid silver; border-image: none;" width="60%">COLORANT LIQUID RED</td> <td style="border: 1px solid silver; border-image: none;" width="20%">4.00&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; border-image: none;" width="20%">72031</td> <td style="border: 1px solid silver; border-image: none;" width="60%">COLORANT LIQUID YELLOW</td> <td style="border: 1px solid silver; border-image: none;" width="20%">4.00&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; border-image: none;" width="20%">72032</td> <td style="border: 1px solid silver; border-image: none;" width="60%">COLORANT LIQUID WHITE</td> <td style="border: 1px solid silver; border-image: none;" width="20%">4.00&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; border-image: none;" width="20%">73002</td> <td style="border: 1px solid silver; border-image: none;" width="60%">GLITTER SILVER</td> <td style="border: 1px solid silver; border-image: none;" width="20%">5.00&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; border-image: none;" width="20%">73012</td> <td style="border: 1px solid silver; border-image: none;" width="60%">GLITTER BLACK</td> <td style="border: 1px solid silver; border-image: none;" width="20%">5.00&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; border-image: none;" width="20%">76006</td> <td style="border: 1px solid silver; border-image: none;" width="60%">RATTLES&nbsp;MIDDLE X50</td> <td style="border: 1px solid silver; border-image: none;" width="20%">15.00&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; border-image: none;" width="20%">74004</td> <td style="border: 1px solid silver; border-image: none;" width="60%">ANISSED AROMA</td> <td style="border: 1px solid silver; border-image: none;" width="20%">3.00&euro;</td> </tr> <tr class="texte_tb"> <td class="cadeau" rowspan="3" style="border: 1px solid silver; border-image: none;">&nbsp;</td> <td style="border: 1px solid silver; border-image: none;"> <div align="right">Total</div> </td> <td style="border: 1px solid silver; border-image: none;" width="20%">120.00&euro;</td> </tr> <tr> <td class="texte_g_blue" style="border: 1px solid silver; border-image: none;"> <div align="right">Special offer</div> </td> <td class="texte_g_blue" style="border: 1px solid silver; border-image: none;" width="20%">105&euro;</td> </tr> <tr> <td class="texte_tb" style="border: 1px solid silver; border-image: none;"> <div align="right">Discount</div> </td> <td class="texte_g_red" style="border: 1px solid silver; border-image: none;" width="20%">12.5%</td> </tr> <tr class="pied"> <td colspan="3" height="10" style="border: 0px solid silver; border-image: none;">&nbsp;</td> </tr> </tbody> </table> https://www.bricoleurre.uk/product/starter-kit-bricovernis-syringe-stick-cup <p>Starter kit including 2x60xml of varnish, a set of 3 brushes, a set of cups and sticks and 2 syringes.</p> https://www.bricoleurre.uk/product/starter-kit-for-professionals <p align="justify">This kit has been designed to offer &quot;home made men&quot; a wide range of products. With 16 colours, 6 glitter colours, a flavour, rattles, silicone and plastiline, you can create a beautiful assortment of lures.</p> <p align="justify">&nbsp;<strong>&nbsp;&nbsp; With this kit, you can make about 800 slugs of 11 cm or 264 shads of 12 cm.</strong></p> <table align="center" style="border: 0px solid silver; border-image: none; border-collapse: collapse;" width="450"> <tbody> <tr class="chapeau"> <td class="text_chapeau" colspan="3" style="border: 0px solid silver; text-align: center;"> <p>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Starter Kit for Professionnals (price VAT)</p> </td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; text-align: center;" width="20%">71002</td> <td style="border: 1px solid silver; text-align: center;" width="60%">SOFT PLASTILEURRE 3 LITRES</td> <td style="border: 1px solid silver; text-align: center;" width="20%">53.00&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; text-align: center;" width="20%">71007</td> <td style="border: 1px solid silver; text-align: center;" width="60%">HARD PLASTILEURRE LITRE</td> <td style="border: 1px solid silver; text-align: center;" width="20%">19.00&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; text-align: center;" width="20%">72002</td> <td style="border: 1px solid silver; text-align: center;" width="60%">COLORANT BRUNE</td> <td style="border: 1px solid silver; text-align: center;" width="20%">6.00&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; text-align: center;" width="20%">72003</td> <td style="border: 1px solid silver; text-align: center;" width="60%">COLORANT GOLD</td> <td style="border: 1px solid silver; text-align: center;" width="20%">6.00&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; text-align: center;" width="20%">72004</td> <td style="border: 1px solid silver; text-align: center;" width="60%">COLORANT BRIGHT BLUE</td> <td style="border: 1px solid silver; text-align: center;" width="20%">9.50&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; text-align: center;" width="20%">72008</td> <td style="border: 1px solid silver; text-align: center;" width="60%">COLORANT BRIGHT PURPLE</td> <td style="border: 1px solid silver; text-align: center;" width="20%">9.50&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; text-align: center;" width="20%">72009</td> <td style="border: 1px solid silver; text-align: center;" width="60%">COLORANT BRIGHT BLUE GREEN</td> <td style="border: 1px solid silver; text-align: center;" width="20%">9.50&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; text-align: center;" width="20%">72001</td> <td style="border: 1px solid silver; text-align: center;" width="60%">COLORANT WHITE</td> <td style="border: 1px solid silver; text-align: center;" width="20%">6.00&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; text-align: center;" width="20%">72022</td> <td style="border: 1px solid silver; text-align: center;" width="60%">COLORANT IRIDESCENT RED</td> <td style="border: 1px solid silver; text-align: center;" width="20%">7.50&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; text-align: center;" width="20%">72021</td> <td style="border: 1px solid silver; text-align: center;" width="60%">COLORANT IRIDESCENT ORANGE</td> <td style="border: 1px solid silver; text-align: center;" width="20%">7.50&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; text-align: center;" width="20%">72025</td> <td style="border: 1px solid silver; text-align: center;" width="60%">COLORANT BLACK</td> <td style="border: 1px solid silver; text-align: center;" width="20%">4.00&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; text-align: center;" width="20%">72026</td> <td style="border: 1px solid silver; text-align: center;" width="60%">COLORANT BLUE</td> <td style="border: 1px solid silver; text-align: center;" width="20%">4.00&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; text-align: center;" width="20%">72030</td> <td style="border: 1px solid silver; text-align: center;" width="60%">COLORANT RED</td> <td style="border: 1px solid silver; text-align: center;" width="20%">4.00&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; text-align: center;" width="20%">72031</td> <td style="border: 1px solid silver; text-align: center;" width="60%">COLORANT YELLOW</td> <td style="border: 1px solid silver; text-align: center;" width="20%">4.00&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; text-align: center;" width="20%">72035</td> <td style="border: 1px solid silver; text-align: center;" width="60%">COLORANT EMERAUDE GREEN</td> <td style="border: 1px solid silver; text-align: center;" width="20%">4.00&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; text-align: center;" width="20%">72037</td> <td style="border: 1px solid silver; text-align: center;" width="60%">COLORANT CANNELLE</td> <td style="border: 1px solid silver; text-align: center;" width="20%">4.00&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; text-align: center;" width="20%">72040</td> <td style="border: 1px solid silver; text-align: center;" width="60%">COLORANT FLUORESCENT PINK</td> <td style="border: 1px solid silver; text-align: center;" width="20%">4.00&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; text-align: center;" width="20%">72041</td> <td style="border: 1px solid silver; text-align: center;" width="60%">COLORANT FLUORESCENT CHARTREUSE</td> <td style="border: 1px solid silver; text-align: center;" width="20%">4.00&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; text-align: center;" width="20%">73002</td> <td style="border: 1px solid silver; text-align: center;" width="60%">GLITTER SILVER</td> <td style="border: 1px solid silver; text-align: center;" width="20%">5.00&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; text-align: center;" width="20%">73004</td> <td style="border: 1px solid silver; text-align: center;" width="60%">GLITTER GOLD</td> <td style="border: 1px solid silver; text-align: center;" width="20%">5.00&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; text-align: center;" width="20%">73006</td> <td style="border: 1px solid silver; text-align: center;" width="60%">GLITTER GRREN</td> <td style="border: 1px solid silver; text-align: center;" width="20%">5.00&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; text-align: center;" width="20%">73012</td> <td style="border: 1px solid silver; text-align: center;" width="60%">GLITTER BLACK</td> <td style="border: 1px solid silver; text-align: center;" width="20%">5.00&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; text-align: center;" width="20%">73018</td> <td style="border: 1px solid silver; text-align: center;" width="60%">GLITTER COPPER</td> <td style="border: 1px solid silver; text-align: center;" width="20%">5.00&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; text-align: center;" width="20%">73020</td> <td style="border: 1px solid silver; text-align: center;" width="60%">GLITTER ROYAL BLUE</td> <td style="border: 1px solid silver; text-align: center;" width="20%">5.00&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; text-align: center;" width="20%">74004</td> <td style="border: 1px solid silver; text-align: center;" width="60%">ANISSED AROMA</td> <td style="border: 1px solid silver; text-align: center;" width="20%">3.00&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; text-align: center;" width="20%">75001</td> <td style="border: 1px solid silver; text-align: center;" width="60%">WHITE RTV SILICONE</td> <td style="border: 1px solid silver; text-align: center;" width="20%">34.00&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; text-align: center;" width="20%">75006</td> <td style="border: 1px solid silver; text-align: center;" width="60%">PLASTILINE</td> <td style="border: 1px solid silver; text-align: center;" width="20%">15.00&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; text-align: center;" width="20%">76005</td> <td style="border: 1px solid silver; text-align: center;" width="60%">RATTLES SMALL X50</td> <td style="border: 1px solid silver; text-align: center;" width="20%">15.00&euro;</td> </tr> <tr class="texte_tb"> <td style="border: 1px solid silver; text-align: center;" width="20%">76003</td> <td style="border: 1px solid silver; text-align: center;" width="60%">3 RATTLES BIG X10</td> <td style="border: 1px solid silver; text-align: center;" width="20%">15.00&euro;</td> </tr> <tr class="texte_tb"> <td class="cadeau" rowspan="3" style="border: 1px solid silver; text-align: center;">&nbsp;</td> <td style="border: 1px solid silver; border-image: none;"> <div style="text-align: center;">Total</div> </td> <td style="border: 1px solid silver; text-align: center;" width="20%">272.50&euro;</td> </tr> <tr> <td class="texte_g_blue" style="border: 1px solid silver; border-image: none;"> <div style="text-align: center;">Special offer</div> </td> <td class="texte_g_blue" style="border: 1px solid silver; text-align: center;" width="20%">235&euro;</td> </tr> <tr> <td class="texte_tb" style="border: 1px solid silver; border-image: none;"> <div align="right">Discount</div> </td> <td class="texte_g_red" style="border: 1px solid silver; border-image: none;" width="20%">13%</td> </tr> <tr class="pied"> <td colspan="3" height="10" style="border: 0px solid silver; border-image: none;">&nbsp;</td> </tr> </tbody> </table> https://www.bricoleurre.uk/product/stell-wire <p>10 straight rods of 1 m.</p> <p>416 L stainless steel rods ideal for hard lure frames.</p> <p>Caution: these rods are not suitable for high twisting and have low elasticity. For these 2 criteria, it is necessary to choose the rolled steel wires.</p> https://www.bricoleurre.uk/product/super-phospho-beads-7-mm <p>Per 50.</p> https://www.bricoleurre.uk/product/support-decoration-troisieme-main https://www.bricoleurre.uk/product/sweat-bricoleurre https://www.bricoleurre.uk/product/swivel-baril-14-mm-drop-shot <p><font size="2"><img src="/pub/produits/emerillon_drop.jpg" style="padding: 5px; border: 0px currentColor; border-image: none; margin-right: 10px; float: left;" />50 pouch. This black nickel swivel is 14 mm long. It equips the drop-shot lead mold.</font></p> https://www.bricoleurre.uk/product/swivel-baril-20-mm-drop-shot <p><font size="2"><img src="/pub/produits/emerillon_drop.jpg" style="float:left;border:0;padding:5px;margin-right:10px;" />50 pouch. This black nickel swivel is 20&nbsp;mm long. It equips the drop-shot lead mold.</font></p> https://www.bricoleurre.uk/product/swivel-baril-200-lb <p>Per 5.</p> https://www.bricoleurre.uk/product/swivel-baril-400-lb <p>Per 4.</p> https://www.bricoleurre.uk/product/shiny <p><strong>Resin soft lure mold for pike-perch and perch.</strong><br /> &nbsp;</p> https://www.bricoleurre.uk/product/silicone-oil <p>Silicone oil is the diluent of RTV silicone. Up to 20% can be added.<br /> Its advantages:<br /> - makes it possible to obtain a softer material that makes it easier to remove the mould<br /> - limits the formation of bubbles.</p> https://www.bricoleurre.uk/product/swingy <p>The swingy is a freshwater lure whose body rings send vibrations on any animation, and the tail is very sensitive to movement and comes to life at the slightest stress, even when fishing vertically in calm water.</p> <p>Recommended injector.</p> https://www.bricoleurre.uk/product/synthetic-plaster <p>Waterproof bag of 2 Kg.<br /> White casting mass of extreme hardness, fast hardening and strength.<br /> Smooth surface, can be painted.<br /> Composition: semihydrated calcium sulphate.<br /> Dosage: 3 glasses of powder for 1 glass of water<br /> Fast setting at 25&deg;C<br /> Storage 12 months</p> https://www.bricoleurre.uk/product/temperature-regulator <p>Bottle of 25 ml.<br /> Improves the stability of the plastileurre&nbsp;in case of overheating or repeated reheating.</p> https://www.bricoleurre.uk/product/tentacle-madai-jig <p>Per 15.</p> https://www.bricoleurre.uk/product/tete-de-mouse https://www.bricoleurre.uk/product/texan-hooks-reinforced <p>per 25</p> https://www.bricoleurre.uk/product/texan-long-wide-gap-long-hooks-x25 <p>These hooks, manufactured exclusively for Bricoleurre, allow you to cast leaded heads with a fixed Texan hook.</p> <p>The wide gap between the tip and the pole allows good mobility of the hook in the lure</p> <p>corrosion-resistant black &quot;nickel&quot; treatment.</p> https://www.bricoleurre.uk/product/tige-de-nettoyage-de-cuve-pot-a-fusion https://www.bricoleurre.uk/product/toro-surface-100-g <p>Turned, balanced, sanded wooden lure with 250/100th stainless steel frame. Exclusive Bricoleurre!</p> <p>These lures are decorated and varnished by hand by us.<br /> Length: 220 Weight: 100 g<br /> &nbsp;4 colours available: rifle, pink head black, pink, malboro.</p> <p>if you want another color, buy the model to decorate, and make your own creation!</p> https://www.bricoleurre.uk/product/toro-surface-to-decorate <p>Turned, balanced, sanded wooden lure with 250/100th stainless steel frame. Exclusive Bricoleurre!<br /> Length: 220 Weight: 100 g</p> https://www.bricoleurre.uk/product/tresse-acier-gainee-noire https://www.bricoleurre.uk/product/triple-hook-reinforced-exotic <p>Per&nbsp;10. Length: 49 mm</p> https://www.bricoleurre.uk/product/triple-reinforced <p><strong>per 100</strong></p> https://www.bricoleurre.uk/product/triples-bronze-eau-douce https://www.bricoleurre.uk/product/trousse-poisson https://www.bricoleurre.uk/product/tube-allonge-inox-pour-spinner https://www.bricoleurre.uk/product/tube-silicone-raidisseur https://www.bricoleurre.uk/product/tunastick-sardine <p>The tunastick is a 130 mm wooden lure for 37 g. These lures are manufactured and balanced one by one, by hand. They are then sanded. The tuna stick exists in 3 versions, natural (to decorate yourself) sardine blue and black mule back. He throws himself very well and has a wobbling of madness when he goes down as he sinks. Recommended mounting with exotic broken rings (77133) and single hooks (77142)</p> https://www.bricoleurre.uk/product/tunastick-mullet <p>The tunastick is a 130 mm wooden lure for 37 g. These lures are manufactured and balanced one by one, by hand. They are then sanded. The tunastick exists in 3 versions, natural (to decorate yourself) sardine blue and black mule back. He throws himself very well and has a wobbling of madness when he goes down as he sinks. Recommended mounting with bricoleurre broken rings (77133) and single hooks (77142).</p> https://www.bricoleurre.uk/product/tunastick-to-decorate <p>The tuna stick is a 130 mm wooden lure for 37 g. These lures are made and balanced one by one, by hand. They are then sanded. The tunastick exists in 3 versions, natural (to decorate yourself) sardine blue and black mule back. It launches very well and has a wobbling of madness when it goes down while sinking... Recommended assembly with the broken rings bricoleurre (77133) and the single hooks ( 77142)</p> https://www.bricoleurre.uk/product/twistech-v2 <p data-end="108" data-start="43"><span style="font-size:18px;">⚠️ </span>&nbsp;​<span style="font-size:18px;">TWISTECH V2 works as a modular system. You must choose your configuration&nbsp;⚠️ </span></p> <p data-end="108" data-start="43"><br data-end="694" data-start="691" /> <span style="font-size:16px;"><strong>Twistech Complet PETIT (&Eacute;trier + Twistech Petit)</strong> :&nbsp;<u>for small setups&nbsp;<strong data-end="2355" data-start="2304">(0.40&ndash;0.60 mm)</strong></u></span></p> <p data-end="771" data-start="674"><span style="font-size:16px;"><strong>Twistech Complet MOYEN (&Eacute;trier + Twistech Moyen)</strong> :&nbsp;<u>for medium setups&nbsp;<strong data-end="2408" data-start="2358">(0.60&ndash;1.00 mm)</strong></u></span></p> https://www.bricoleurre.uk/product/trombone-link <div class="tw-ta-container F0azHf tw-nfl" id="tw-target-text-container" tabindex="0"> <pre class="tw-data-text tw-text-large tw-ta" data-placeholder="Traduction" data-ved="2ahUKEwiwrKLXu9qCAxWDTKQEHWFFAK8Q3ewLegQIBRAP" dir="ltr" id="tw-target-text" style="text-align:left"> <span class="Y2IQFc" lang="en">the line clips are extremely resistant, and are particularly useful for night fishing: in fact you can put on a lure or a rig simply by touch! this is far from being the case with certain links .... already difficult to use in broad daylight!!</span></pre> </div> <pre class="tw-data-placeholder tw-text-small tw-ta" data-placeholder="" dir="ltr" id="tw-target-rmn" style="text-align:left"> &nbsp;</pre> https://www.bricoleurre.uk/product/turlutte-a-decorer https://www.bricoleurre.uk/product/wave-up-shad <p>Made of a very flexible but resistant material, the WAVE UP Shad is activated as soon as it enters the water and even at a very slow pace. With a unique weight on each size, it can be sealed at will thanks to the addition of interchangeable weights. Its ballast placed towards the front of the lure allows it to remain stable even in the most powerful currents.</p> https://www.bricoleurre.uk/product/willow-leaf-pallet <p>Per 10.</p> https://www.bricoleurre.uk/product/white-rtv-silicone <p>Silicone to make your own lure moulds. The drying time depends on the amount of catalyst. High quality silicone with micron molding accuracy.</p> <p>Bricoleurre silicone is a polycondensation silicone elastomer, which is in the form of a viscous liquid. After mixing the 2 components, the working time is a few minutes.<br /> The mixture gradually thickens and demoulding can be done in a few hours.<br /> - Flexible, homogeneous and resistant mass<br /> - Impression accuracy to the micron<br /> - Self-demolding<br /> - Resists 180 degrees C (do not use for lead)<br /> - Tear-proof<br /> - Crosslinking time at 20 degrees C :<br /> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;- catalyst at 2%: 24h<br /> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;- catalyst at 3%: 15h<br /> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;- catalyst at 4%: 9h<br /> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;- catalyst at 5%: 3h<br /> - Recommended dosage 2 to 5%, i. e. 2 to 5 g catalyst per 100 g RTV<br /> - Color: white<br /> - Curing time: 12 hours<br /> - Hardness: (shore A)27<br /> - Storage: 12 months in closed packaging.<br /> - Solvent: White Spirit<br /> - Thinner: silicone oil (5 to 10% max.)</p> <p>Employment advice:<br /> - Wear suitable gloves. Avoid contact with eyes. In case of contact with eyes, rinse thoroughly with clean water. In case of irritation, consult a doctor.<br /> - Do not leave within reach of children<br /> - Do not ingest.</p> <p>USE :<br /> - Not suitable for use and food contact.</p> <p>5 kg jar with catalyst (4,750 Kg of silicone + 250g of catalyst).</p> https://www.bricoleurre.uk/product/yellow-fluorescent-beads-6-mm <p>Per 50.</p> https://www.bricoleurre.uk/product/yellow-fluorescent-beads-8-mm <p>Per 50.</p> https://www.bricoleurre.uk/product/yellow-lunimeous-tubes <p>By 20 units - 20 mm long - 2.4 mm in diameter.<br /> The plastic tube, which is sealed tightly, contains two chemical compounds separated by an easy-to-break glass bulb. The twisting of the plastic tube causes the bulb to break, causing the two products to mix, resulting in the production of light by fluorescence. This glow decreases at low temperatures, it is more intense with heat. It can last up to 8 hours.<br /> The products are neither toxic nor flammable. Their storage period before use varies from two to five years.<br /> Due to its small diameter, this tube can be inserted, like a rattle, into a translucent flexible lure to make it bright even at great depth. It can also be glued on a hard lure with cyano glue</p> https://www.bricoleurre.uk/product/yeux-3-d-holographiques-autocollants https://www.bricoleurre.uk/product/assist-hooks-double-mounted <p>top quality assists hooks, cut for exotic fishing, manufactured exclusively for Bricoleurre on our own specifications.</p> <p>We successfully tested these hooks (before marketing them) on jacks and yellowfin tuna in the Bay of Mail, Madagascar!</p> <p>bag of 2 double assist hooks, mounted, with stainless steel ring.</p> https://www.bricoleurre.uk/product/kit-fc-lancon-120 https://www.bricoleurre.uk/product/softshell-sans-manche https://www.bricoleurre.uk/product/solution-hydro-alcoolique